The Sibel Nano Ion Platinum Steamer is a professional facial steamer for beauty salons and other professional beauty treatments. The device produces warm nano-ion steam that moisturizes the skin during a facial and prepares it for further cleansing or care.
Thanks to the fine mist, the steam is comfortably distributed over the face. With a power of 280 watts , the steamer heats up quickly and can be practically used within consecutive salon treatments.
Important: this is not a device that produces exclusively cold mist. The Sibel Nano Ion Platinum Steamer actually works with warm steam .
The steam produced by the device is created by heating water. Consequently, the water and steam directly in and near the device can be very hot. The temperature that ultimately reaches the skin is significantly lower because the steam cools down along the way and mixes with the surrounding air.
For this type of nano-ion platinum steamer, a temperature of approximately 40 °C at a distance of about 25 cm is stated as a technical indication. However, this value should not be regarded as a precisely regulated outlet temperature guaranteed by Sibel. The actual temperature experienced depends, among other things, on the distance to the outlet and the surroundings.
Therefore, always maintain sufficient distance between the steam vent and the face, and assess before and during the treatment whether the temperature is comfortable for the client.
The steamer converts water into a fine, warm steam mist. Sibel applies nano-ion technology to create a fine mist that is guided over the skin during a facial treatment.
The warm steam helps to moisturize the skin and can be used as a preparatory step before, for example, a professional cleansing treatment.
Thus, the steamer is primarily a preparatory salon device . The steam does not cleanse the skin independently, but supports a treatment by preparing the skin for the next steps through heat and moisture.
With facial steamers, confusion can arise regarding the difference between a cold mist and real steam. With the Sibel Nano Ion Platinum Steamer, water is heated to produce warm steam .
The term nano-ion therefore does not mean that the device produces exclusively a cold ultrasonic mist. The treatment combines fine atomization with heat.
That difference is important when you want to purchase the device for treatments where the warming and moisturizing effect of a traditional facial steamer is specifically desired.
The temperature of steam is not the same at every distance. Close to the outlet, the steam is hotter. As the distance increases, the steam mixes with the ambient air and the temperature drops before it reaches the skin.
A distance of approximately 25 cm is used as a reference for the stated temperature indication of approximately 40 °C. Never place your face directly at the outlet opening.
Check the distance and comfort for every client during the treatment. A comfortable temperature for one person may already be too warm for someone with sensitive skin.
Demineralized water must be used for this Sibel steamer. This is important for the proper functioning of the appliance and helps limit mineral deposits from tap water.
Therefore, do not simply use ordinary tap water and do not add essential oils, perfume, herbs, or other liquids to the water reservoir, unless Sibel expressly permits this for the device.
A steam device works with hot water. Immediately after switching it on and during the warm-up period, the steam and any water droplets formed can be significantly hotter than the temperature experienced at normal treatment distance.
Therefore, do not direct the outlet directly at the face during startup. Wait until even steam production has been established and check the steam before starting the treatment.
The Sibel Nano Ion Platinum Steamer is intended for professional facial treatments where warm steam is used to moisturize the skin and prepare it for further treatment.
The steamer can be used, for example, before a facial cleanse. The warm, humid environment supports the preparation of the skin, after which the beautician can perform the rest of the treatment.
The steamer does not replace a skin cleansing product, peel, or other specific treatment; it forms a preparatory step within the overall treatment.
Please note regarding the temperature: approximately 40 °C is a technical indication for the steam/mist at a distance of approximately 25 cm and not a guaranteed, thermostatically controlled skin temperature specified by Sibel for every usage situation.
Yes. The device heats water and produces warm nano-ion steam. So it is not exclusively a cold mist.
As a technical indication, a temperature of approximately 40 °C can be assumed at a distance of about 25 cm from the outlet. Water and steam are hotter directly at the device. The temperature reached by the skin depends on factors such as distance and ambient temperature.
No. The stated approximately 40 °C should be regarded as a technical indication regarding operating distance and not as a thermostatic setting guaranteed by Sibel. Therefore, check the distance and the client's comfort during every treatment.
The specified warm-up time is approximately 30 seconds. After that, steam production can start.
Use demineralized water. This helps limit mineral deposits in the appliance and complies with the operating instructions for this steamer.
Do not add essential oil, perfume, or other substances to the water unless the manufacturer explicitly permits it for this device. For normal use, use only the prescribed demineralized water.
Approximately 25 cm is a relevant reference distance for the stated temperature indication. The safe and comfortable distance must always be checked during treatment and increased if necessary.
Yes. The Sibel Nano Ion Platinum Steamer is developed for professional beauty and facial treatments and is suitable for use in a beauty salon, among other places.
This steamer is particularly interesting for professionals looking for a compact facial steamer that allows warm, finely atomized nano-ion steam to be used as preparation for a facial treatment.
The combination of 280 W power, rapid heating, fine steam production, and the use of hot steam makes the device suitable for regular professional use. At the same time, it is important to use the steamer correctly: use demineralized water, keep a sufficient distance, and always check the temperature for comfort.
This makes the Sibel Nano Ion Platinum Steamer a practical choice when you are specifically looking for a professional facial steamer with warm steam , and not a device that only produces cold mist.
