Lisap Developer 10 Vol 1000 ml is a professional creamy oxidation emulsion with 3% hydrogen peroxide . The developer is mixed with suitable Lisap hair dyes and bleaching products to activate the oxidation process. The creamy consistency mixes easily and helps create an even and workable color mixture.
10 Volume is equivalent to 3% hydrogen peroxide. This is a relatively low developer strength. However, the required developer, mixing ratio, and processing time are always determined by the specific color or bleaching product you combine it with and the desired color result.
Lisap developed the Developer series for professional use in conjunction with its color and bleaching products. The formula has a creamy texture and has been developed to mix well with the corresponding color product, so that the mixture can be applied easily and evenly.
The choice of developer is part of the color formula. 10 Vol / 3% is used when the relevant Lisap color product prescribes this developer strength, for example in certain applications where little or no lightening of the natural hair base is desired.
Do not automatically use 10 Vol for every coloring. A permanent hair dye, toner, high-lift dye, or bleaching product may require a different developer strength and mixing ratio. Therefore, always follow the technical instructions for use of the specific Lisap product with which the developer is mixed.
The Lisap Developer series consists of various strengths. The percentages indicate the hydrogen peroxide concentration:
A higher percentage does not automatically mean a better color result. Use only the developer strength prescribed for the chosen color or bleaching product and the desired technical application.
There is no universal mixing ratio or processing time for this developer. The correct ratio and processing are determined by the product with which Lisap Developer is combined.
Aqua (Water, Eau), Cetearyl Alcohol, Hydrogen Peroxide, Ceteareth-30, Etidronic Acid, Tetrasodium EDTA, Itaconate Copolymer, Glycerin, Phosphoric Acid, Tetrasodium Pyrophosphate, Sodium Stannate, Acrylates/Ceteth-20 Itaconate Copolymer.
Product formulas may be changed by the manufacturer. The ingredient list on the received packaging is always leading.
Contains hydrogen peroxide. Avoid contact with eyes. In case of contact with eyes, rinse immediately and thoroughly with water. Wear suitable gloves and use the product only according to the instructions of the dye or bleaching product with which it is combined. Keep out of reach of children.
10 Vol corresponds to 3% hydrogen peroxide. Lisap also offers developers in other strengths, including 1.5%, 6%, 9%, and 12%.
There is no fixed mixing ratio that applies to all Lisap products. Always use the ratio prescribed by Lisap for the specific hair dye or bleach you combine Developer 10 Vol with.
No. A developer is not a standalone hair care or color product. It is part of a professional coloring or bleaching system and is mixed with a suitable product.
Yes. With this Lisap Developer , 10 Volume is equivalent to a concentration of 3% hydrogen peroxide .
Not without further consideration. The developer strength affects the coloring process. Therefore, use the strength prescribed for the chosen Lisap product and the desired coloring technique.